Custom Parts

This is the standard Crosman bolt fitted to the Discovery rifle, but it will fit the .22 22XX and 13XX guns. It's a 2 piece screw together design with a longer handle and extended probe.

Price:
12.00

New style 2 piece screw together blued steel bolt handle and brass extended probe. This .22 bolt is fitted with a blued steel bolt handle for superior strength over models fitted with a brass handle. The extended probe pushes the pellet further past the transfer port for a better flow of gas, resulting in better accuracy and consistency. You might even gain a few extra fpe (feet per second) over the standard one. Now fitted with a magnet at the back of the bolt to aid loading.

Price:
16.50

Replace the original plastic trigger with one of these solid brass units. It will improve the look, feel and function of the trigger. Fit the 2 screws provided, and you can adjust the weight of pull and the travel too. Comes with detailed fitting instructions
OUT OF STOCK
 

Price:
22.00

These clever little adaptors make it possible to use standard 12g capsules in the AS2250XT (King Ratcatcher) if used along with the airsource to paintball adaptor, available elsewhere on the website. Using this system has many benefits over using the 88g bottles. You can use it if you don't like to keep your gun gassed in between shooting/hunting sessions, as it's much less of a waste ditching what's left in a 12g capsule than the more expensive 88g bottles. You can use it to check on repairs/leaks. Again, much less of a waste using the 12g capsule. They can also be used if you have already bulked your Crosman and don't want to use a paintball bottle.
How to use, make sure the male threaded end is screwed in to the airsource/paintball adaptor first (there is no internal valve, so if you just screw the 2 halves together, you will lose all your gas), pop a capsule in, screw it all together and your gassed and ready to go.

Price:
15.00

 
This is a very cheap and easy way to use 12g cartridges in your King Ratcatcher. No need to use other adaptors, just screw it in and your away. Ideal for use when you are only going to need a few shots or when testing the gun after a re build.

Price:
18.00

Crosman barrel band. Fit one of these  if you want to fit a longer barrel to your 1322/1377 pump pistol. Made of plastic, it is a direct replacement so easy to fit. ( please note that this barrel band has no front sight fitted to it).

Price:
6.50

 
This is a 3 piece Crosman part fitted to the 2300 pistol and is made for you to be able to adjust the weight of pull on the trigger. It has quite a range of adjustment, so is great to be able to fine tune your trigger pull.

Price:
14.00

This new batch of trigger shoes are the first black ones to be available for a long time. Made from moulded composite plastic, they give  a great look and feel. Just slip them on, and tighten the grub screws. You will be surprised at how much difference they make to the feel of the trigger. Come supplied the allen key. They will fit both brass and blued steel triggers. (do not over tighten)
They will fit the 2240 (Ratbuster), 2250 (Ratcatcher), AS2250 (King Ratchatcher), 1377/1322, 2289 (Backpacker)  and the 2300 pistols.

Price:
7.50

How many times have you damaged the finish of your gun using a flat blade screwdriver? Well, replace the poor quality standard screws with these custom black oxide hex drive screw kits.
These screws will make a great addition to your custom Crosman, as not only do they look good, they are excellent quality too.
They will fit the following models, 2240 (Ratbuster), 2250 (Ratcatcher), 1377/22, 2289 (Backpacker), 2300T, and the 2250XT (King Ratcatcher)
The kit contains the following screws
Grip x 2
Frame side plate x 2
Front grip frame 2240 x 1, 2250 x 1
Rear grips frame x 1
Rear breech, short for Crosman steel breech x 1
Rear breech, long for Crosman plastic breech x 1
Grub screws x 2 for barrel band and barrel set screw (Only if using the Steel breech)
Allen headed hex keys x 4
 
Also included in the kit are 4 delrin trigger and sear shims. (While you have your gun in bits, fit these shims either side of the trigger and sear. This will reduce the side to side play in the trigger to improve the performance and feel of your trigger)

Price:
12.00

 
These new brass .22 bolts are made to the same high standard as the stainless steel ones, and include the magnet at the back, to aid loading a pellet.

Price:
17.50

2 piece blued steel screw together .177 bolt and handle.
Ideal if you are looking fit a metal breech to your .177 Crosman.

Price:
8.00

Ever wanted to fit a scope to your Crosman? Well, now you can. This excellent quality breech can be fitted in minutes and provides a rock solid platform to be able to fit a red dot or scope to your gun. It also comes with a dovetail cut-out to be able to fit a fully adjustable rear sight (MIM), also available on our website. (Original rear sight will not fit)
Breech comes with shorter rear screw and barrel set screw. You can use your original front breech screw, or purchase a new screw and allen ket kit elsewhere on the website  Please Note, The original brass bolt will not fit this breech. You will need to replace it with a 2 piece screw together bolt. These 2 piece screw together bolts are available elsewhere on the website
Because the barrel is held so tightly you can remove the barrel band and free-float the barrel too. Fitting one will also improve accuracy and consistency. This really is one of the best custom parts you can fit to your Crosman. Will fit the 2240 (Ratbuster), 2250, (Ratcatcher), 1322/77, 2289 (backpacker), and the 2260 (Rabbit Stopper)

Price:
30.00

These power adjusters are made by Crosman and come complete with delrin spring guide and coated spring. The adjuster is fitted with a locking grub screw to be able to set your chosen power.
Fitting one of these power adjusters makes it possible to increase the tension of the hammer spring resulting in an increase in power. However, they can also be used to decrease the power which will result in more shots per charge. They are especially useful when trying to tune your gun to get the best mix of power/shots per charge. You will also find that when you hit that sweet spot that accuracy and consistency will improve too. Will fit the 2240 (Ratbuster), 2250 (Ratcatcher), 2300, and 2260 (Rabbit Stopper).

Price:
22.00

Standard blued steel end plug to fit the Crosman steel breech.

Price:
3.00

Excellent fibre optic front sight is a direct replacement for the original. Just tap the old one off and fit this one. Will fit the 2240 (Ratbuster), 2250 (Ratcatcher), 2260 (Rabbit Stopper), AS2250 (King Ratcatcher), 2300, 2289

Price:
4.00

If you are going to take your Crosman apart you will end up removing the breech, and you might just have trouble removing the front breech screw. Now can can easily remove it and have a replacement screw.

Price:
2.75

This kit contains a delrin hammer spring guide and a trigger spring guide together with a pair of quality replacement springs. The hammer spring is slightly stronger with more coils to give a better feel and the trigger spring is lighter. When fitted, they give a lighter, crisper trigger release and a smoother cocking action. Will fit the 2240, 2250, AS2250, 1322/1377, 2300 and 2289

Price:
11.50

This is an excellent fully adjustable rear sight designed to fit the dovetail machined in the Crosman steel breech. It is a top quality unit made in Italy, fully adjustable for windage and elevation, just slide it in and tighten the grub screws with the included allen key. It also comes with a neat little adjustment tool. Please note, that this will only fit the Crosman steel breech.

 

Price:
35.00

Fit this adapter to your AS2250XT/King Ratcatcher and you can use a re-fillable paintball tank to power your gun. Use a 3.5 oz tank and retain the plastic stock or use a big 12 oz tank and a tank butt-pad and have over 500 shots per fill. Fantastic quality, anodised aluminium. Adapters will accept bottles with pin or on/off valves. You can also use this adaptor with the 12g CO2 adaptors.
(no bottle available yet).
OUT OF STOCK

Price:
28.00

Made exclusivley by Crosman for Crosman CO2 and pump rifles and pistols. Keep your gun working in tip top condition by using a few drops of this oil on your O rings and seal. If used correctly, it can prolong the life of your O rings and seals, making your gun work for longer. It is especially useful if you leave your CO2 gun gassed for long periods of time.
Put a spot of oil on the end of a new CO2 cartridge before you but it in, and it will help prevent the bottle seal drying and sticking to the cartridge. Can also be used on moving parts

Price:
2.75

The cheapest and easiest way to fit a scope or red dot to your gun. Place the 2 mounts over your barrel and tighten them in place with the supplied allen key. They will fit the 2240/50/60, 1322/1377, 2300 and 2289

 

Price:
10.00

Quality slot head stainless steel screws to replace the standard allen headed ones that sit in the loading tray of the breech. Makes the repeated removal of this screw much easier to deal with.

 
 

Price:
2.50

These delrin spacers will take up some of the lateral play in your trigger blade and sear, giving a much better feel and more consistent pull. Will fit the 2240 (Ratbuster), 2250, (Ratcatcher), 1322/77, 2289 (Backpacker), and the 2300 pistols

Price:
2.00