New Products
 |
Stainless Steel PartsWe are please to be able to offer a new range of fantastic quality stainless steel parts that will enhance the function of your Crosman and give it a very modern look. These parts include extended bolts in both .22 and .177, safety buttons, power adjusters, rear end caps, powerlet caps and allen headed re-bolt kits.
|
 |
Custom Allen Headed Re-Bolt KitsHow many times have you damaged the finish of your gun using a flat blade screwdriver? Well, replace the poor quality standard screws with these custom black oxide finished hex drive screw kits. These screws will make a great addition to your custom Crosman, as not only do they look good, they are excellent quality too. |
| They will fit the following models, 2240, 2250, 1377/22, 2289 and the 2250XT (King Ratcatcher) The kit contains the following screws Grip x 2 Frame side plate x 2 Front grip frame 2240 x 1, 2250 x 1 Rear grips frame x 1 Rear breech, short for Crosman steel breech x 1 Rear breech, long for Crosman plastic breech x 1 Grub screws x 2 for barrel band and barrel set screw (Only if using the Steel breech) Allen headed hex keys x 4 |
 |
Also included in the kit are 4 delrin trigger and sear shims. (While you have your gun in bits, fit these shims either side of the trigger and sear. This will reduce the side to side play in the trigger to improve the performance and feel of your trigger) Price £14 Stainless kits coming soon...
|
 |
 |
 |
 |
Crossman Blued Steel Breech (6 1/4" Long)Ever wanted to fit a scope to your Crosman? Well, now you can. This excellent quality breech can be fitted in minutes and provides a rock solid platform to be able to fit a red dot or scope to your gun. It also comes with a dovetail cut-out to be able to fit a fully adjustable rear sight (MIM), also available on our website. Breech only, does not include bolt. The .22 CB extended bolt can be had for £17 elsewhere on the website. Because the barrel is held so tightly you can remove the barrel band and free-float the barrel too. Fitting one will also improve accuracy and consistency. This really is one of the best custom parts you can fit to your Crosman. Price £26
|
 |
Deluxe Easy Fit Trigger shoesThese new trigger shoes are again made from anodised aluminium, but this deluxe version covers the entire surface of the trigger blade and has a grooved surface. They are also easy fit, which means you just squeeze them tightly onto the trigger blade and tighten the 2 grub screws with the supplied allen key. They are great quality and available in polished and matt finish. They will fit the 2240, 2250, 1377/22 and the AS2250 king ratcatcher.
Price £8 |
 |
 |
12g Co2 Capsule AdaptorThese clever little adaptors make it possible to use standard 12G capsules in the AS2250XT (King Ratcatcher) if used along with the airsource to paintball adaptor (available in the custom parts section). Using this system has many benefits over using the 88G bottles. You can use it if you don't like to keep your gun gassed in between shooting/hunting session, as it's much less of a waste ditching what's left in a 12G capsule than the more expensive 88G bottles. You can use it to check on repairs/leaks. Again, much less of a waste using the 12G capsule. They can also be used if you have already bulked your Crosman and don't want to use a paintball bottle. |
How to use, make sure the male threaded end is screwed in to the airsource/paintball adaptor first (there is no internal valve, so if you just screw the 2 halves together, you will lose all your gas), pop a capsule in, screw it all together and your gassed and ready to go. Price £15 |
 |
