SD Custom Design

.177 and .22 Bolts

These 2 piece screw together bolts have extended probes that push the pellet further past the transfer port for a better flow of gas, resulting in better accuracy and consistency. You might even gain a few extra fpe (feet per second) over the standard one. They also have a small magnet fitted to the back, which stops the bolt from sliding forwards when loading a pellet into the breech.

Price £16

Power Adjusters

Fitting one of these power adjusters makes it possible to increase the tension of the hammer spring resulting in an increase in power. However, they can also be used to decrease the power which will result in more shots per charge. They are especially useful when trying to tune your gun to get the best mix of power/shots per charge. You will also find that when you hit that sweet spot that accuracy and consistency will improve too. They also come fitted with an integral spring guide which will help stop the hammer spring deforming when under pressure.

They will fit the 2240 , 2250 (ratcatcher) and the 2260 (rabbit stopper).

Price £22

Safety Button

Identical to the original only made from quality stainless steel, which looks and feels great.

Price £10

End Caps

Identical to the original only made from quality stainless steel. Fit one to complement the other stainless parts.

Price £9

Powerlet caps

Identical to the original only made from quality stainless steel. Fit one to complement the other stainless parts. Fits the 2240. Will also fit the 2250 and 2260, but you will have to remove the extension bar from the original and fit to the new one.

Price £9

Stainless steel re-bolt kits

How many times have you damaged the finish of your gun using a flat blade screwdriver? Well, replace the poor quality standard screws with these custom stainless steel hex drive screw kits.
These screws will make a great addition to your custom Crosman, as not only do they look good, they are excellent quality too.

They will fit the following models, 2240, 2250, 1377/22, 2289 and the 2250XT (King Ratcatcher)

The kit contains the following screws
Grip x 2
Frame side plate x 2
Front grip frame 2240 x 1, 2250 x 1
Rear grips frame x 1
Rear breech, short for Crosman steel breech x 1
Rear breech, long for Crosman plastic breech x 1
Grub screws x 2 for barrel band and barrel set screw (Only if using the Steel breech)
Allen headed hex keys x 4
Small tube of loctite

Also included in the kit are 4 delrin trigger and sear shims. (While you have your gun in bits, fit these shims either side of the trigger and sear. This will reduce the side to side play in the trigger to improve the performance and feel of your trigger)

Price £14